Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for SGM X Line IDEA WASH 575
Summary of Contents for SGM X Line IDEA WASH 575
- Page 1 IDEA WASH 575 M O V I N G H E A D S...
- Page 2 Nell’ottica di qualità SGM, è possibile che l’Azienda apporti migliorie ai suoi prodotti, per cui consigliamo di alle- gare il manuale al prodotto stesso e di trascrivere il numero di serie nell’ultima pagina della copertina: utilizzando il presente manuale con un apparecchio fabbricato prima o dopo la sua stampa, potrebbero esserci discrepanze fra l’apparecchio e quanto riportato nel manuale stesso.
-
Page 3: Table Of Contents
SGM Technology for Lighting Table of Contents INTRODUCTION: ..............................2 Features................................2 SAFETY INSTRUCTIONS ............................3 GENERAL GUIDELINES............................4 INSTALLATION INSTRUCTIONS........................5 a) Installing or replacing the lamp......................5 b) Mounting the device..........................6 Installation method via clamp........................7 DMX-512 control connection........................8 Control Board ..............................9 Main functions ..............................11 INSTRUCTIONS ON USE: ..........................19... -
Page 4: Introduction
SGM Technology for Lighting KEEP THIS MANUAL FOR FUTURE NEEDS For your own safety, please read this user manual carefully before installing the device. CAUTION Keep this device away from rain and moisture! Unplug mains lead before opening the housing... -
Page 5: Safety Instructions
SGM Technology for Lighting SAFETY INSTRUCTIONS CAUTION Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when to touching wires! This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. -
Page 6: General Guidelines
SGM Technology for Lighting GENERAL GUIDELINES This device is a lighting effect for professional use on stages, in discotheques, theatres, etc. This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in the last page of this manual, the device was designed for indoor use only. -
Page 7: Installation Instructions
SGM Technology for Lighting INSTALLATION INSTRUCTIONS a) Installing or replacing the lamp CAUTION Only install the lamp with the device unplugged from the mains . The lamp has to be replaced when it is damaged or deformed. Before replacing the lamp let the lamp cool down, because during operation, the lamp can reach very high temperature. -
Page 8: B) Mounting The Device
SGM Technology for Lighting b) Mounting the device CAUTION Pleas consider the EN 60598-2-17 and the other respective national norms during the installation. The installation must only be carried out by a qualified person. The installation of the effect has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation. -
Page 9: Installation Method Via Clamp
SGM Technology for Lighting Installation method via clamp Please refer to the picture below: Screw one clamp each via a M12 screw and nut onto the Omega holders. Insert the quick-lock fasteners of the first Omega holder into the respective holes on the bottom of the device. -
Page 10: Dmx-512 Control Connection
SGM Technology for Lighting DMX-512 control connection The product has a DMX 512 input fitted with standard 5-pin XLR connectors. Screened cables in compliance with EIA RS-485 specifications and the following characteristics must be used for connections: - 2 conductors plus screen... -
Page 11: Control Board
SGM Technology for Lighting Projector DMX start address selection All fixtures should be given a DMX starting address when using a DMX signal, so that the correct fixture responds to the correct control signals. This digital starting address is the channel number from which the fixture starts to “listen”... - Page 12 SGM Technology for Lighting Default settings shaded. Main Sub. Display Extension Function menu menu A001~AXXX VALU DMX address setting (AXXX) SLAV ON/OFF (SLAV) Slave setting ADDR Change DMX address via EBOC ON/OFF external controller ALON (AU-A) Automatic Run in Stand Alone...
-
Page 13: Main Functions
SGM Technology for Lighting Main functions - Main menu 0 1. Press [MODE/ESC] to enter the main menu "MODE" (display flashing) 2. Press [ENTER] and select "ADDR", “RUN” or "DISP" by pressing [UP] or [DOWN] button. 3. Press [ENTER] for selecting the desired sub menu. - Page 14 SGM Technology for Lighting -DMX address setting via controller With this function, you can adjust the desired DMX-address via an external controller. This function can only be activated when the DMX-value of all other channels is set to "0" on the controller.
- Page 15 SGM Technology for Lighting - Reverse display With this function you can rotate the display by 180°. 1. Select "RDIS" by pressing [UP] or [DOWN] button. 2. Press [ENTER], the display shows “ON” or “OFF”. 3. Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you don’t;...
- Page 16 SGM Technology for Lighting - Delay lamp on With this function you delay the lamp ignition. 1. Select “DELA” by pressing [UP] or [DOWN] button. 2. Press [ENTER], the display shows “D-XX”,”XX” stands for the version number, e.g. “D-15” (default setting is 15 minutes for lamp delay time) 3.
- Page 17 SGM Technology for Lighting -Automatic Run by no DMX With this function you can automatic run the device by no DMX. Select “AUTO” by pressing [UP] or [DOWN] button. Press [ENTER], the display shows “CLOS”, “HOLD”, “AUTO” or “AUDI”. Press [UP] or [DOWN] button to select “CLOS”, “HOLD”, “AUTO” or “AUDI”, the default is “HOLD”.
- Page 18 SGM Technology for Lighting - Lamp adjustment With this function you can adjust the lamp via the Control Board. The shutter opens and the lamp can be adjusted. In this mode, the device will not react to any control signal.
- Page 19 SGM Technology for Lighting - Clear lamp time With this function you can clear the running time of the lamp. Please clear the lamp time every time you replace the lamp. Select “CLLT” by pressing [UP] or [DOWN] button. Press [ENTER], the display shows “ON” or “OFF”.
- Page 20 SGM Technology for Lighting - Editing the channels of the individual scenes With this function you can edit the program to be called up in Run. a) Editing via the Control Board 1. Select “SC01” by pressing [UP] or [DOWN] button.
-
Page 21: Instructions On Use
SGM Technology for Lighting INSTRUCTIONS ON USE: DMX channel´s functions and their values (16 DMX channels): Channel 1 - PAN movement 8bit : Channel 2 – Pan fine 16bit Channel 3 - TILT movement 8bit : Channel 4– Tilt fine 16bit... - Page 22 SGM Technology for Lighting Channel 10 - Shutter, strobe: 0-31 Shutter closed 32-63 No function (shutter open) 64-95 Strobe effect slow to fast 96-127 No function (shutter open) 128-159 Pulse-effect in sequences 160-191 No function (shutter open) 192-223 Random strobe effect slow to fast...
- Page 23 SGM Technology for Lighting Channel 15 - Effect wheel 0-70 Full beam 71-230 Beam shaper 231-255 Frost filter Channel 16 - Colour macros - CMY and colour wheel 128-135 Macro16 8-15 Macro1 136-143 Macro17 16-23 Macro2 144-151 Macro18 24-31 Macro3...
-
Page 24: Error Codes
SGM Technology for Lighting ERROR CODES: When power is applied, the unit will automatically enter “reset/test” mode. This mode brings all the internal motors to a home position. If there is an internal problem with one or more of the motors an error code will flash in the display in the form of “XXer”... -
Page 25: Cleaning And Maintenance
SGM Technology for Lighting CLEANING AND MAINTENANCE The following points have to be considered during the inspection: 1. All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded. 2. There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension, trussing).