Control Menu - SGM Q-10 User Manual

Control menu

Level 1 Level 2
Mode Select Mode
Info Product Type
Firmware Version
Serial Number
RDM ID
DMX View
Temperatures
Power on time
LED On Time
Errors
Settings Wireless DMX
Startup Mode
Flip Display
Display Saver
Fan Mode
Factory Default
Manual Quick Color
Run Program
Stop Program
Editor
Test Off
Automated Test
Display Test
Level 3 Function
- Select DMX mode
- Displays product type
- Displays installed firmware version
- Displays SGM serial#
- Displays RDM ID. (Unique RDM ID for identification )
Up to 504 DMX addresses Displays received DMX levels
Mainboard
LED Left
LED Right
Humidity head
Fan Left RPM
Fan Right RPM
Displays
Wireless signal
Wireless paired
Light pwn
Humidity base
Base
- Displays fixture total power on time
- Displays LED total power on time. (R, G, B, W)
- Displays error codes
Wireless log off Sends Log off command to the CRMX System
Signal strength Displays strength of the wireless connection
Select Startup Mode Default operating mode when fixtrue is powered on: 1. DMX (factory default)
Startup Program Stand-alone program 1, 2 or 3.
Only used if the startup mode is set to "stand-alone". Program 1 is default.
Disable Selects normal control panel display.
Enable Flips control panel display.
Display Off Turns off the OLED display when the control panel is not in use.
Display Dim Dims the OLED display when the control panel is not in use.
Standard Adjust fan speed relative to internal fixture temperature.
Silent Low fan speed for quiet operation.
Max Power High fan speed for maximum cooling effect.
- Reset the fixture to factory default settings.
Red Static quick color - red mix (0-255). Sets fixture to quick color startup mode.
Green Static quick color - green mix (0-255). Sets fixture to quick color startup mode.
Blue Static quick color - blue mix (0-255). Sets fixture to quick color startup mode.
1, 2 or 3 Runs internal sequence 1,2 or 3.
- Stops current running internal sequence or Quick Color.
Program Currently selected program (1, 2 or 3).
Scene Currently selected scene (1-24).
Red Red value in currently selected scene (0-255).
Green Green value in currently selected scene (0-255).
Blue Blue value in currently selected scene (0-255).
Shutter Shutter setting in currently selected scene (0-255). (According to latest DMX chart)
Fade Time (Min.) Fade-in (transition) time to current scene in min. (0-511).
Fade Time (Sec.) Fade-in (transition) time to current scene in sec. (0-59).
Wait Time (Min.) Wait (static) time in current scene in min. (0-998).
Wait Time (Sec.) Wait (static) time in current scene in sec. (0-59).
- Stops test sequence execution.
- Initiates a self-test sequence.
- Service use only.
fixture temperatures
2. Stand-alone
3. Quick Color
13