Accessories; Barndoors; Anti-Glare Shields - SGM Q Series User Manual

Accessories

The Q-10 Series can be used with various accessories such as cables, barndoors, and anti-glare shields.
To get to know all the available Q-10 accessories, see www.sgmlight.com or contact your local SGM dealer.

Barndoors

The Q-10 Series features 4-way barndoors. The barndoors are designed and intended to be mounted on the fixture without the use
of any tools.
To install the barndoors:
1. Attach the lower plug-in pins to the bottom part of the Q-10 front.
2. Pull the two upper lock pins and fit the upper part of the barndoor in the Q-10 head.
3. Release the lock pins and check that they are correctly in place.
Upper lock pins
PLEASE NOTE!!
The barndoors are not intended for permanent outdoor installations.

Anti-glare shields

The Q-10 Series supports two different types of optional anti-glare shields:
• Full anti-glare shield - covers the full fixture's opening.
• Half anti-glare shield - covers half of the fixture's opening.
Using the anti-glare shields will remove any unwanted glare and reflections.
The anti-glare shields are easily mounted by removing the two tilt lock bolts, one on each side of the fixture. Refit the anti-glare shield
in position and screw both tilt lock bolts again.
Note: The anti-glare shields are suitable for both permanent outdoor and indoor installations.
For further information and other possibilities see www.sgmlight.com or contact your local SGM dealer.
Attachment
Lower
plug-in pins
Figure 21: Barndoors
Figure 22: Full and half anti-glare shields
points
19