Chapter 2. Hardware Setup; Overview; Before You Begin - ATEN KN1108VA User Manual

8/16-port cat 5 kvm over ip switch
Hide thumbs Also See for KN1108VA:
Table of Contents

Advertisement

Overview

For convenience and flexibility that allows mixing the PS/2 and USB
interfaces, as well as multiple platforms, the KVM over IP switch design
utilizes KVM Adapter Cables, that serve as intermediaries between the switch
and the connected devices (refer to the installation diagram on p. 16).
A separate KVM Adapter Cable is required for each server or device
connection. The model numbers of the Adapters are given in the KVM Adapter
Cables section, page 7.

Before You Begin

1. Important safety information regarding the placement and
grounding of this device is provided on page 221 and onwards.
Please review it before proceeding.
2. Make sure that the power to any device that you connect to the
installation has been turned off. You m ust unplug the power cords
Hardware Setup
Chapter 2
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kn1116va

Table of Contents