The Port Toolbar - ATEN KN1108VA User Manual

The Port Toolbar

The KVM over IP switch's interface provides a toolbar to help you with port
switching operations from within the captured port. To bring up the toolbar, tap
the GUI Hotkey (Scroll Lock or Ctrl), twice. The toolbar appears at the upper
left corner of the screen:
Depending on the settings that were selected for ID Display (see page 110), the
Port Number and/or the Port Name display at the right of the toolbar. The
meanings of the toolbar icons are given in a table on page 205.
When the toolbar displays mouse and keyboard input has no effect on the
server connected to the port. To carry out operations on the server, close the
toolbar by clicking its X icon.
To return to the Port Access Connections page, either click the appropriate icon
(see The Toolbar Icons, page 205), or tap the GUI hotkey again.
Note: 1. You can adjust the toolbar transparency (see Video Settings, page 67).
2. The toolbar functions and icons are also incorporated in the Control
Panel. If you choose to enable them in the Control Panel (see Control
Panel Configuration, page 83), you can disable the Toolbar (see User
Preferences, page 110 for details). To recall the Port Access
Connections page when there is no Toolbar, simply tap the GUI
hotkey twice.
Chapter 12. Port Operation
204