Table of Contents
Advertisement
Chapter 8. Device Management
SNMP Agent
The SNMP Agent allows you to configure Device Management settings with a
MIB browser using the MIB file downloaded from our website. The MIB file*
imports into the MIB browser to configure the following Device Management
settings: Operating Mode: Mode; Network: IP Installer, Service Ports, IPv4
Settings, IPv6 Settings; ANMS - Event Destination: Log Server, SNMP Trap,
Authentication: CC Management.
To connect to the switch through an MIB browser, use the instructions below
to add an SNMP Agent to allow access from the computer you will use to
configure to the switch settings.
To add an SNMP Agent, do the following:
1. Check Enable.
2. Click Add. A window appears:
162
Advertisement
Table of Contents
