Table of Contents
Advertisement
KN1108VA / KN1116VA User Manual
KVM Adapter Cables
Cat 5e/6 cable is required to connect the KN1108VA / KN1116VA to one of
the KVM adapter cables.
The following KVM adapter cables are required for use with the KN1108VA /
KN1116VA:
Connect to devices with PS/2 ports
Connect to devices with USB ports
(All platforms – PC, Mac, Sun)
Connect to Sun Legacy Computers
Connect to serial based devices
For USB computers – DVI output, Virtual
Media and Smart Card Reader support
For USB computers – HDMI output, Virtual
Media and Smart Card Reader support
For USB computers – DisplayPort output,
Virtual Media and Smart Card Reader support
For KVM Switch and USB computers – USB-
PS/2 KVM Adapter Module with Local Console
For USB computers – VGA output, Virtual
Media support
For USB computers – VGA output, Virtual
Media and audio support
For USB computers – VGA output, Virtual
Media and Smart Card Reader support
For USB computers – dual connection with
VGA output, Virtual Media and audio support
Note: If you use Adapter Cables purchased prior to your switch purchase, you
may have to upgrade the Adapter's firmware (see page 192).
7
Function
Module
KA9120 / KA7120
KA7170
KA9130 / KA7130
KA7140
KA7166
KA7168
KA7169
KA7171
KA7175
KA7176
KA7177
KA7178
Advertisement
Table of Contents
