Ipv6; Link Local Ipv6 Address - ATEN KN1108VA User Manual

IPv6

At present, the KN1108VA / KN1116VA supports three IPv6 address
protocols: Link Local IPv6 Address, IPv6 Stateless Autoconfiguration, and
Stateful Autoconfiguration (DHCPv6).

Link Local IPv6 Address

At power on, the KN1108VA / KN1116VA is automatically configured with a
Link Local IPv6 Address (for example, fe80::210:74ff:fe61:1ef). To find out
what the Link Local IPv6 Address is, log in with the KN1108VA / KN1116VA
IPv4 address and open the Device Management
The address is displayed in the General list box (see page 147).
Once you have determined what the IPv6 address is, you can use it when
logging in from a browser or the Win and Java Client AP programs.
For example:
If you are logging in from a browser, you would key in
http://[fe80::2001:74ff:fe6e:59%5]
for the URL bar.
If you are logging in with the AP program, you would key:
fe80::2001:74ff:fe6e:59%5
for the IP field of the Server panel (see Windows Client AP Login, page 40).
Note: 1. To log in with the Link Local IPv6 Address, the client computer must
be on the same local network segment as the KN1108VA /
KN1116VA
2. The %5 is the %interface used by the client computer. To see your
client computer's IPv6 address: from the command line issue the
following command: ipconfig /all. The % value appears at the
end of the IPv6 address.
→
Device Information page.
Appendix
230