Table of Contents
Advertisement
KN1108VA / KN1116VA User Manual
WinClient Control Panel Functions
The Control Panel functions are described in the table below.
Icon
This is a toggle. Click to make the Control Panel persistent – i.e., it
always displays on top of other screen elements. Click again to have
it display normally.
Click to bring up the Macros dialog box (see page 58 for details).
Click to bring up the Video Options dialog box. Right-click to perform
a quick Auto Sync (see Video Settings, page 67, for details).
Click to perform a video and mouse autosync operation. It is the
same as clicking the Auto-sync button in the Video Options dialog
box (see Video Settings, page 67).
Toggles the display between Full Screen Mode and Windowed Mode.
Click to take a snapshot (screen capture) of the remote display.
See Snapshot, page 84, for details on configuring the Snapshot
parameters.
Click to bring up the Message Board (see The Message Board,
page 71).
Click to send a Ctrl+Alt+Del signal to the remote system.
Click to toggle the remote display between color and gray scale
views.
Click to bring up the Virtual Media dialog box. The icon changes
depending on the status of the virtual media function. See Virtual
Media, page 73, for specific details.
Note: This icon displays in gray when the function is disabled or not
available.
Click to zoom the remote display window.
Note: This feature is only available in windowed mode (Full Screen
Mode is off). See Zoom, page 76 for details.
Click to bring up the on-screen keyboard (see The On-Screen
Keyboard, page 77).
Click to select the mouse pointer type.
Note: This icon changes depending on which mouse pointer type is
55
selected (see Mouse Pointer Type, page 79).
Function
Advertisement
Table of Contents
