Table of Contents
Advertisement
KN1108VA / KN1116VA User Manual
3. Select the KN1108VA / KN1116VA in the Device List.
Note: 1. If the list is empty, or your device doesn't appear, click
Enumerate to refresh the Device List.
2. If there is more than one device in the list, use the MAC address
to pick the one you want.
4. Select either Obtain an IP address automatically (DHCP), or Use the
following IP address. If you chose the latter, fill the IP Address, Subnet
Mask, and Gateway fields with the information appropriate to your
network.
5. Click Set IP.
6. After the IP address shows up in the Device List, click Exit. See IP
Installer, page 151 for more information.
Browser
1. Set your client computer's IP address to 192.168.0.XXX
Where XXX represents any number or numbers except 60. (192.168.0.60 is
the default address of the KN1108VA / KN1116VA.)
2. Specify the switch's default IP address (192.168.0.60) in your browser, and
you will be able to connect.
3. Assign a fixed IP address for the KN1108VA / KN1116VA that is suitable
for the network segment that it resides on.
After you log out, reset your client computer's IP address to its original value.
229
Advertisement
Table of Contents
