IDEC KW2D Series User Manual page 87

Disable RFID tag
"Disable" RFID tags that are registered in the tag list and the check box of Enable/Disable is selected (enabled).
• The registration master tag and the deletion master tag cannot be disabled.
• If the number of registered tags exceeds 500, the registered contents of the tags disabled by the delete
operation will be deleted from the tag list.
■ Operating Procedure
1
Hold the master tag for deletion.
The KW2D Smart RFID Reader is in "tag edit mode (deleting)".
Running
The LEDs (white) flash slowly.
LED (white)
LED (white)
LED (white)
Buzzer
The LEDs (red) are ON and the LEDs (white) flash rapidly.
None
(100 ms interval)
2 Hold the RFID tags to disable one by one.
Deleting
The LEDs (red) are ON and the LEDs (white) flash rapidly.
LED (red)
LED (white)
LED (red)
Buzzer
Four short beeps The LEDs (red) are ON.
One short beep The LEDs (green) are ON.
Deleting
The LEDs (red) are ON and the LEDs (white) flash rapidly.
LED (white) LED (white)
LED
Deletion successful
The LEDs (red) are ON.
LED (white)
Deletion failure
The LEDs (green) are ON.
LED (green)
LED
KW2D Series Smart RFID Reader User's Manual
2 KW2D Series Smart RFID Reader Functions
LED (red)
LED (white)
LED (red)
Status
Waiting to read the tag to disable
LED (red)
Four short beeps
LED (red)
One short beep
LED （緑）
Status
Deletion successful
Deletion failure
5
5-19