IDEC KW2D Series User Manual page 60

2 EtherNet/IP Communication (Adapter)
Ethernet Link object (Class ID: F6H)
An object that provides Ethernet status information.
■ Class Attributes (Instance ID: 0)
Available ServiceID
• Get_Attribute_Single(0EH)
AttributeID List
ID Attributes
1 R Revision
2 R Max Instance
3 R Number of Instances
■ Instance attribute (Instance ID: 1)
Available ServiceID
• Get_Attribute_Single(0EH)
• Get_Attribute_All(01H)
AttributeID List
ID Attributes
1 R Interface Speed
2 R Interface Flags
3 R Physical Address
Interface Capability
Capability Bits
Speed/Duplex Options
11 R
Speed/Duplex Array Count
Speed/Duplex Array
Interface Speed
Interface Duplex Mode
RFID object (Class ID: 64H)
An object that provides KW2D information.
■ Class Attributes (Instance ID: 0)
Available ServiceID
• Get_Attribute_Single(0EH)
AttributeID List
ID Attributes
1 R RFID_ERR
■ Instance attribute
There is no instance attribution.
4-18
Name Data Type
UNIT
UNIT
UNIT
Name Data Type
UDINT
DWORD
ARRAY of 6
USINTs
STRUCT of: Interface function
DWORD
STRUCT of:
USINT
ARRY of
STRUCT of:
UINT
USINT
Name Data Type
USINT
KW2D Series Smart RFID Reader User's Manual
Description
Object revisions
Maximum instance number
Number of generated object instances
Description
Interface communication speed (Mbps)
Interface status flag
Full-duplex: 15
Half-duplex:13
Acquisition failure: 5
MAC layer address
bit0: Reset after change or not (No: 0)
bit1: Auto-negotiate function (Yes: 1)
bit2: Auto-MDIX function (Yes: 1)
bit3: Set value can be changed or not (No: 0)
Number of Speed/Duplex Array arrays
Interface communication speed (Mbps)
0: Half-duplex, 1: Full-duplex
Description
KW2D Series Smart RFID Reader error
information
If an error occurs, the following bits will turn
ON.
bit0: Reservation
bit1: No RFID setting
bit2: Tag list not registered
bit3: Host communication error
bit4 to 15: Reserved
Value
4
1
1
Value
100
15
MAC address
value
-
6
-
1
-
100
1
Value
-