IDEC KW2D Series User Manual page 104

2 Configuration and Functions
"Event Transmission(TCP) " is selected
No. Communication Mode
1 Event Transmission(TCP)
2
Unused
3
ModbusTCP Server
(Maintenance)
Maintenance
4
Communication Server
Unused
5
Maintenance
Communication Server
Event Transmission(TCP) Dialog Box
Send Destination
IP Address: Specifies the IP address of the destination host device for Event Transmission. (Default: blank)
The format is "xxx.xxx.xxx.xxx". "xxx" stands for a numeric value from 0 to 255.
When connecting multiple devices to the same network, make that each device has a unique IP address.
Port No.: Specifies the TCP port number (1 to 65535) of the destination host device for Event Transmission.
(Default: 1)
6-8
Port No.
-
- -
-
504
2101
-
2102
KW2D Series Smart RFID Reader User's Manual
The KW2D Series Smart RFID Reader operates as a TCP client and
performs TCP communication with the host device operating as a TCP
server.
Click Setting to display the Event Transmission(TCP) dialog box.
For details, refer to " Event Transmission(TCP) Dialog Box" on page 6-8.
Do not use this port.
It is used to monitor the status of the KW2D Series Smart RFID Reader
on another host device.
To restrict access to the KW2D Series Smart RFID Reader, select the
Restrict check box, and then enter the IP address from which access is
allowed in the Allow Access by IP Address field.
Use this port to communicate with the KW RFID Configurator.
Do not use this port.
Use this port to communicate with the KW RFID Configurator.
Description
-