IDEC KW2D Series User Manual page 29

How to install
●
1
Align the TOP marks on the front unit and the back unit, and then insert the back unit into the front unit.
You cannot insert the back unit into the front unit if the locking lever is in the locked position ("LOCK").
Caution
Always confirm that the locking lever is in the unlocked position (opposite direction of "LOCK").
2 Confirm that the back unit is inserted fully into the front unit, and then while pressing the locking lever (1) on the
back unit, push it in the direction indicated by "LOCK" (2).
(1)
• Confirm that the locking lever is on the other side of the protrusion. The lock is not fully engaged if the
Caution
locking lever is not in the lock position ("LOCk  ") on the other side of the protrusion.
• After attaching , confirm that the back unit does not come off.
This completes attaching the back unit to the front unit.
TOP mark
Locking lever
Locking lever
(2)
KW2D Series Smart RFID Reader User's Manual
2 How to install and remove
Front of back unit
TOP mark
(2)
Protrusion
3
3-3