IDEC KW2D Series User Manual page 39

5 Terminals
Precautions When Crimping Wires
●
Please be careful not to cause the following problems when crimping wires.
• Cracks along the sides and die impressions
• Splitting of the ferrules
• Asymmetrical crimping shape
• Extreme burrs formed along the sides
• Ferrule not filled by conductor
• Single conductors pushed back by protruding from the insulated cover
• Single conductor squeezed off
• Insulation cover damaged by the crimping jaw
• Conductor insulation not pushed into the insulated cover
3
• Ferrule bent longitudinally after crimping
Cracks are formed along the sides Cracks are formed after crimping
Asymmetrical crimping shape.
Burr formation on one side.
Single conductor squeezed off. Single conductor pushed back.
3-13
KW2D Series Smart RFID Reader User's Manual