IDEC KW2D Series User Manual page 21

Ethernet Communication Specifications
●
Communication Type
Connector
Isolation
Transmission Speed
Communication Functions
Cable
RFID Interface Specifications
●
Communication Standards
Communication Speed
Radio Frequency
Supported Tags *1
Tag Reading Distance
*2
Tag Reading Position
*3
Tag Reading Time
*4
• The listed value is that in an ideal environment that is not affected by radio waves and metals in the
surrounding area. Carefully check the performance of this product in your environment.
• For installation, refer to Chapter 3 "1 Installation and Wiring Precautions" on page 3-1.
*1 Multiple tags cannot be read.
*2 The tag reading distance is a value that was measured using the tags listed in "LSI list of Operation-confirmed tags" on page 2-4 that IDEC
has tested. The tag reading distance will vary depending on the tag that is actually used and the operating environment.
*3 The tag reading position is the value when a standard IDEC tag is placed near the center of the reader. The tag reading distance changes
with the characteristics of a tag used and the operating environment..
*4 Configures the Read Reaction Time under the Tag Read Settings on the RFID Reader Settings tab of KW RFID Configurator. For
details, refer to Chapter 6 "Reading Time" on page 6-12.
IEEE 802.3 compliant
Connector RJ-45
Pull force 15 N
Insertion/removal
100 times minimum
durability
Pulse transformer isolated
10BASE-T and 100BASE-TX
ModbusTCP communication (server), EtherNet/IP communication (adapter), CC-Link IE
Field Basic communication (slave), Event Transmission (TCP, UDP), and maintenance
communication (server) are supported.
Category 5 or higher rated twisted pair cable with a maximum length of 100 m
ISO/IEC14443 Type A, ISO/IEC 18092, JIS X6319-4, and ISO/IEC 15693
ISO/IEC18092 (Felica) 212 kbps
ISO/IEC14443 TypeA 106 kbps
ISO/IEC 15693 26.5 kbps
13.56 MHz (HF band)
KEYFOB type ISO/IEC 14443 Type A
Card type ISO/IEC 14443 Type A, ISO/IEC18092 (FeliCa), ISO/IEC15693
KEYFOB type 0 to 5 mm
Card type 0 to 15 mm
Center of tag stationary in center of front unit
300 to 3000 ms
KW2D Series Smart RFID Reader User's Manual
1 Specifications
2
2-3