IDEC KW2D Series User Manual page 82

2 KW2D Series Smart RFID Reader Functions
Input register (0001 to 0032)
●
Address
Description
No.
0001 Reserved
0002
0003
0004
0005
0006
0007
0008
0009 to
0011
Tag
information
0012
0013
0014
0015
0016
0017
0018
0019
0020
0021
0022
0023
0024
0025
0026
0027
0028
0029
0030
0031
Lock operation time
0032 *2
(current value)
*1 After reading the RFID tag, the tag information is retained for up to 3 seconds. After that, it is set to the initial value.
*2 The input register 0031 (number of detections) counts up for each tag detection. Since the tag information value is updated at the same
time as the count is increased, the memory update timing can be grasped by monitoring the change in the number of detections.
5-14
65535: Reading RFID tag
Other than reading RFID tag, the status is as follows
Upper byte (Status of KW2D Smart RFID Reader)
00h: Operation mode (running), 01h: Tag edit mode (registering)
02h: Tag edit mode (deleting)
Lower byte (verification result or authority)
0: Not match, 1 to 255: Authority
Status,
Verification
With tag list registration:
result or
Authority
No tag list registration:
UID data
Number of bytes (1 to 10, 0 is UID not stored)
length
Stored in order of upper byte (1st byte) and lower byte (2nd byte)
Stored in order of upper byte (3rd byte) and lower byte (4th byte)
UID Stored in order of upper byte (5th byte) and lower byte (6th byte)
Stored in order of upper byte (7th byte) and lower byte (8th byte)
Stored in order of upper byte (9th byte) and lower byte (10th byte)
Reserved
*1
Stored in order of upper byte (1st character) and lower byte (2nd character)
Stored in order of upper byte (3rd character) and lower byte (4th character)
Stored in order of upper byte (5th character) and lower byte (6th character)
Stored in order of upper byte (7th character) and lower byte (8th character)
Name1 Stored in order of upper byte (9th character) and lower byte (10th character)
Stored in order of upper byte (11th character) and lower byte (12th character)
Stored in order of upper byte (13th character) and lower byte (14th character)
Stored in order of upper byte (15th character) and lower byte (16th character)
Stored in order of upper byte (17th character) and lower byte (18th character)
Reserved
Stored in order of upper byte (1st character) and lower byte (2nd character)
Stored in order of upper byte (3rd character) and lower byte (4th character)
Stored in order of upper byte (5th character) and lower byte (6th character)
Stored in order of upper byte (7th character) and lower byte (8th character)
Name2 Stored in order of upper byte (9th character) and lower byte (10th character)
Stored in order of upper byte (11th character) and lower byte (12th character)
Stored in order of upper byte (13th character) and lower byte (14th character)
Stored in order of upper byte (15th character) and lower byte (16th character)
Stored in order of upper byte (17th character) and lower byte (18th character)
Number of
Stores the number of RFID tag detections.
detections
Stores the lock operation time during downcounting.
KW2D Series Smart RFID Reader User's Manual
Explanation
-
The UID is verified with the tag list. If OK, the
authority registered in the tag list is stored. For a
KW2D special tag, if authority 1 to 254 is specified
in the tag list, the authority registered in the tag
list is stored. If 255 is specified in the tag list, the
authority assigned to the special tag is stored.
For a KW2D special tag, the authority assigned to
the special tag is stored. For other tags, 0 is
stored.
-
-
Initial
R/W
Value
- -
R 65535
R 0
R 0
R 0
R 0
R 0
R 0
- -
R 0
R 0
R 0
R 0
R 0
R 0
R 0
R 0
R 0
- -
R 0
R 0
R 0
R 0
R 0
R 0
R 0
R 0
R 0
R 0
R 0