IDEC KW2D Series User Manual page 107

Option
Send Ping: Send a ping to detect host communication errors. This can be set when "Event Transmission(UDP)" is
selected as "1" in the No. When this check box is selected, the KW2D Series Smart RFID Reader sends a
ping to the destination at the specified interval (1 to 10 seconds). If the Send Ping is not successful for
10 seconds or more, a host communication error will occur and the LED (red) will blink.
For Event Transmission, select the Send Ping check box to detect a communication failure with the host
device as a host communication error.
Use Received Data: The KW2D smart RFID reader displays the detection result based on the response data from the
host device. This can be set when "Event Transmission(UDP)" is selected as "1" in No. When this
check box is selected, the host device must return the response data to the KW2D Series Smart
RFID Reader within two seconds after receiving the transmitted data. If the KW2D Series Smart
RFID Reader does not receive the response data in time, the detection result will be a host
communication error.
Data storage
location
When the Received Data is not used, the judgment criteria changes depending on whether the tag list is
present or not.
With tag list: Judge based on UID verification result
No tag list: Always OK judgment
"Unused(For Demo) " is selected
No. Communication Mode Port No.
1 Unused(For Demo)
2 -
Unused
ModbusTCP Server
(Maintenance)
3
Event Transmission(TCP)
Event
Transmission(UDP)
Maintenance
4
Communication Server
Unused
5
Maintenance
Communication Server
Number of
Contents
bytes
1 1 Sequence number
2 1 Verification result
You can check the operation of the KW2D smart RFID reader without
connecting a host device.
502 A host communication error does not occur even if the host device is not
connected. The detection result is judged by the verification result with the tag
list.
-
- Do not use this port.
It is used to monitor the status of the KW2D Series Smart RFID Reader on
another host device.
504 To restrict access to the KW2D Series Smart RFID Reader, select the Restrict
check box, and then enter the IP address from which access is allowed in the
Allow Access by IP Address field.
The KW2D Series Smart RFID Reader operates as a client and performs TCP
communication with the host device as a server.
-
Click Setting to display the Event Transmission(TCP) dialog box. For
details, refer to " Event Transmission(TCP) Dialog Box" on page 6-8.
Performs UDP communication with the host device without a connection.
- Click Setting to display the Event Transmission(UDP) dialog box. For
details, refer to "Event Transmission(UDP) Dialog Box" on page 6-10.
2101 Use this port to communicate with the KW RFID Configurator.
- Do not use this port.
2102 Use this port to communicate with the KW RFID Configurator.
KW2D Series Smart RFID Reader User's Manual
2 Configuration and Functions
Description
0 (30h) to 9 (39h), A (41h) to F (46h)
Stores the received sequence number.
Reply ACK (06h) or NAK (15h).
Description
-
6
6-11