IDEC KW2D Series User Manual page 84

2 KW2D Series Smart RFID Reader Functions
Operate the buzzer and LED
●
When you enable manual operation of the buzzer and LED, you can operate the buzzer and LED with the value of the
coil relays.
On the RFID Reader Settings tab of KW RFID Configurator, clear the Use buzzer check box or Use LED check box to
enable manual operation of the buzzer or LED regardless of the value of the coil relay.
Address No.
0009 Manual control of the buzzer
0010 Ring or stop the buzzer
0011 Manual control of the LEDs (red)
0012 Turn on or off the LEDs (red)
0013 Manual control of the LEDs (white)
0014 Turn on or off the LEDs (white)
0015 Manual control of the LEDs (green)
0016 Turn on or off the LEDs (green)
5-16
Description
Enables or disables the manual operation of
the buzzer.
0: Disable, 1: Enable
Operate the buzzer.
0: Stop, 1: Ring
Enables or disables the manual operation of
the LEDs(red).
0: Disable, 1: Enable
Operate the LEDs (red).
0: Turn off, 1: Turn on
Enables or disables the manual operation of
the LEDs (white).
0: Disable, 1: Enable
Operate the LEDs (white).
0: Turn off, 1: Turn on
Enables or disables the manual operation of
the LEDs (green).
0: Disable, 1: Enable
Operate the LEDs (green).
0: Turn off, 1: Turn on
KW2D Series Smart RFID Reader User's Manual
Explanation
Initial
R/W
Value
R/W 0
R/W 0
R/W 0
R/W 0
R/W 0
R/W 0
R/W 0
R/W 0