IDEC KW2D Series User Manual page 119

■ Target Information
Displays information on the KW2D Series Smart RFID Reader to monitor.
Name: Displays the name of the KW2D Series Smart RFID Reader.
System Software: Displays the System Software version of the KW2D Series Smart RFID Reader.
MAC Address: Displays the MAC address of the connected KW2D Series Smart RFID Reader.
Online/Offline: Displays the connection status between the KW RFID Configurator and the KW2D Series Smart
RFID Reader.
■ (List of tag information)
Displays the list of tag information read by the KW2D Series Smart RFID Reader. A maximum of 50 items of tag
information can be displayed. Tag information is not displayed for the 51st and subsequent items.
No.: Displays the number (1 to 50) of the tag information that was read.
IC Tag Standard: Displays the RFID tag standard of the tag information that was read.
UID: Displays the UID of the tag information that was read.
Name1: Displays the Name1 of the tag information that was read.
Name2: Displays the Name2 of the tag information that was read.
Authority: Displays the authority of the tag information that was read. "Unregistered" is displayed if the
authority was not registered.
You can edit Name1 and Name2. When the UID is read after changing the name, the changed name will be
displayed instead of the name obtained from the KW2D Series Smart RFID Reader. (The changed name is
applied to all the tag information having the same UID.) If the changed UID also exists in the tag list, the
change is also applied to the name of the tag list.
■ Save unregistered UID to Tag List button
Registers UIDs with Authority set to Unregistered to the tag list of the project being edited.
A confirmation message is displayed.
Click Yes to disconnect the KW2D smart RFID reader and register the UID in the tag list.
Click No to return to the RFID Reader Monitor dialog box without registering the UID.
■ Clear button
Deletes the tag information read from the KW2D Series Smart RFID Reader from the list of tag information.
■ Finish button
Closes the RFID Reader Monitor dialog box and returns to the KW RFID Configurator.
2 Change each setting as necessary and then click Connect.
KW2D Series Smart RFID Reader User's Manual
4 Online
6
6-23