IDEC KW2D Series User Manual page 86

2 KW2D Series Smart RFID Reader Functions
2
Hold up the RFID tags to be enabled or registered one by one.
Registering
The LEDs (green) are ON and the LEDs (white) flash rapidly.
LED (white)
LED (green)
LED (white)
Buzzer
One short beep
Four short beeps
3 Hold up the registration master tag again.
When the tag list update is complete, the KW2D Smart RFID Reader is restarted.
If you turn off the power without performing step
returned to the one before changing.
Registering
The LEDs (green) are ON and the LEDs (white) flash rapidly.
LED (white)
LED (green)
LED (white)
Buzzer
One short beep
• Name1 of the registered tag is "ADD TAG***" (***: Registration position of tag list 001 to 500), Authority
(1~255) is the same as the authority of the registration master tag, the check box of Protect is cleared.
• When the number of registered tags exceeds 500, registered tags for which the check box of Enable/Disable
is cleared (Disable) and the check box of Protect is cleared are overwritten. If there is no disabled tag in the
tag list, the KW2D Smart RFID Reader will be in the "registration failed" state.
5-18
LED (green)
LED
The LEDs (green) are ON.
The LEDs (red) are ON.
LED (green)
LED
The LEDs (green) and the LEDs (red)
are ON.
KW2D Series Smart RFID Reader User's Manual
Registration successful
The LEDs (green) are ON.
LED (green)
Registration failure
The LEDs (red) are ON.
LED (red)
LED (red)
Registration successful
Registration failure
3
, the changes made here will be discarded and the tag list will be
Registration complete
The LEDs (green) and the LEDs (red) are ON.
LED （緑）
Completed updating the tag list of the KW2D Smart RFID
Reader
One short beep
LED （緑）
Four short beeps
Status
LED (red)
One short beep
LED (green)
LED (red)
Status