IDEC KW2D Series User Manual page 37

■ Stranded wire
Operate the pusher with about 20 N of force. The product may break and no longer function if you press
Caution
with Caution excessive force.
1 While pressing the pusher (white button) using a flat blade screwdriver. Insert the wire fully in the wiring port. Wire
is connected when the pusher is released.
2
After wiring, tug lightly to make sure that the wire is properly connected.
How to remove the wire
●
Press the pusher with a flat blade screwdriver and pull the wire straight out.
• Operate the pusher with about 20 N of force. The product may break and no longer function if you press
Caution
with excessive force.
• The product may be damaged and no longer function if you pull out the wire without pressing the pusher
or if you pull the wire at an angle.
KW2D Series Smart RFID Reader User's Manual
4 Power Supply and Power Supply Wiring
Pusher
Pusher
3
3-11