Power Supply Terminal Block Wiring Method - IDEC KW2D Series User Manual

4 Power Supply and Power Supply Wiring

4.4 Power Supply Terminal Block Wiring Method

Turn off the power before wiring.
Warning
How to attach the wire
●
• Crimping dimensions of the terminal hole side (Maximum connectable crimping size) is W2.1 x H1.48mm.
Warning
Recommended crimping tool, refer to "5.3 Recommended Tools" on page 3-15.
• Connect the ferrules to the terminal block so that the long side is horizontal as shown in the figure below.
Do not insert the ferrules in the vertical direction as shown in the figure below. The clamp and spring may
break and no longer function.
■ Stranded wires with ferrules or solid wire
1
Insert the wire straight to the back of the wire port, and then the wire will be connected.
2 After wiring, pull the wires lightly to make sure that the wire is properly connected.
3-10
KW2D Series Smart RFID Reader User's Manual