IDEC KW2D Series User Manual page 70

1 KW2D Series Smart RFID Reader Statuses and Operations
Running
●
RFID tag reading is executed periodically according to IC Tag Standard specified on the RFID Reader Settings tab
in the KW RFID Configurator.
Running
The LEDs (white) flash slowly.
LED (white)
Buzzer
None The LEDs (white) flash slowly. (1 s interval)
None The LEDs (red) flash rapidly. (100 ms interval)
The LEDs (green) and the LEDs (red) flash. (500 ms
None
interval)
• RFID tags cannot be detected while data is being modified.
• When you download the system software or project, the KW2D smart RFID reader restarts after a reset.
Stopped
●
Buzzer
None OFF
By changing the value of the coil relay, the KW2D Smart RFID Reader can be set to "Operation mode
(stopped)". For details, refer to "Stop the KW2D Smart RFID Reader" on page 5-15.
5-2
LED (white)
LED (white)
LED (white)
LED
LED
KW2D Series Smart RFID Reader User's Manual
Communication error is occurring
The LEDs (red) flash rapidly.
LED (red)
LED (red)
Data is being modified
The LEDs (green) and the LEDs (red) flash.
LED (red)
LED (green)
LED (red)
Running
Waiting to read RFID tag.
Communication error is occurring
Host communication is interrupted for more than 10
seconds.
Data is being modified
Downloading system software or project.
RFID tag detection process is stopped.
LED (green)
Status
Status