Grizzly G0866 Owner's Manual page 7

Feed Rate Adjustment Knob
M
Figure 3. Feed rate adjustment knob location.
M. Feed Rate Adjustment Knob: While con-
veyor is moving, turn knob clockwise to
speed up feed rate, and turn it counterclock-
wise to slow it down.
Table
N
Q
P
Figure 4. Table components.
N. Conveyor Belt: Feeds workpiece across
conveyor table during sanding operations.
O. EMERGENCY STOP! Plate: Stops all
machine functions when pressed; engages
emergency brake to stop rotation of sanding
drums.
P. Table Elevation Handwheel: Manually rais-
es and lowers conveyor table. Rotate clock-
wise to lower table; rotate counterclockwise
to raise table. One full rotation moves the
table approximately 0.20".
Q. Conveyor Table: Supports workpiece dur-
ing operations; can be raised and lowered
according to workpiece thickness.
Model G0866 (Mfd. Since 11/18)
Digital Controls
R. Digital Display: Shows current table position
S. Table Up Key
T.
U. Table Start Key
O
V. Table Stop Key
W. Set Key
X.
R
X
Figure 5. Digital table height key pad.
in relation to sanding drum (i.e., workpiece
thickness).
: Raises table by 0.005"
(0.125mm) increments.
Table Down Key : Lowers table by 0.005"
(0.125mm) increments.
: Activates inputted table
height/workpiece thickness.
: Immediately stops table
from moving up and down and cancels key
pad entry.
: Calibrates table position (when
pressed with Table Stop Key
es between standard/metric display.
Numerical Key Pad:
workpiece thickness.
S
T
U
V
W
) and switch-
Sets table height/
-5-