Mounting/Installation - Honeywell NOTIFIER SFP-5UD Series Manual

ANN-BUS Devices

Mounting/Installation

The N-ANN-RLY relay module can be mounted inside the FACP main circuit board chassis or inside the ROME Series enclosure. Refer
to the N-ANN-RLY Installation Document #53318 for instructions on chassis mounting or to the ROME Series Installation Document
#53530 for mounting in the separate backbox.
FACP Chassis Installation
mounting hooks through
ROME Series Installation
using ANN-MBRLY mounting bracket
N-ANN-RLY on
ANN-MBRLY
mounting bracket
SFP-5UD & SFP-10UD Series Manual— P/N 52879:C6 6/12/2018
mounting holes
mounting slots
mounting holes
mounting holes
Figure 2.28 N-ANN-RLY Mounting Options
FACP Backbox Installation
using ANN-MBRLY mounting bracket
grounding wire
mounting holes
ANN-MBRLY
mounting bracket
N-ANN-RLY
mounting holes
Installation
47