3: Relays; 4: System Settings; 5: Timers; 6: Daylight Savings - Honeywell NOTIFIER SFP-5UD Series Manual

Read Status
The operator can press 1 to view the programmed options for NAC 1, 2 to view the programmed options for NAC 2, 3 to view the pro-
grammed options for NAC 3, or 4 to view the programmed options for NAC 4.
The resulting screens will display the following information:
• Enable/Disable Status
• Coding Selection (Temporal, Steady, etc.)
• Silenceable/Nonsilenceable
• Auto Silence Enable/Disable and time delay (in minutes)
• Silence Inhibit Enabled/Disabled
4.19.3 Relays
READ STATUS
1=INPUT ZONES
2=NACS
3=RELAYS
Read Status Screen #1
This screen allows the operator to view the programmed option for each relay.
4.19.4 System Settings
READ STATUS
1=SYSTEM SETTINGS
2=TIMERS
3=DAYLIGHT SAVINGS
Read Status Screen #2
The operator can view the system settings options that have been programmed into the FACP.
4.19.5 Timers
READ STATUS
1=SYSTEM SETTINGS
2=TIMERS
3=DAYLIGHT SAVINGS
Read Status Screen #2
These screens allow the operator to view the various timer settings.
4.19.6 Daylight Savings
Pressing 3 while Read Status Screen #2 will cause the following screens to be displayed:
These screens allow the operator to view settings that have been programmed for Daylight Savings Time.
4.19.7 History
READ STATUS
1=HISTORY
2=PRINTER
3=ANN-BUS
Read Status Screen #3
The operator can view all events which have been stored in the history file, only alarms or other events, such as troubles or supervisories,
by pressing the corresponding number key.
4.19.8 Print
To print program data or control panel status, press 2 while viewing Read Status Screen #3. The following screen will be displayed:
SFP-5UD & SFP-10UD Series Manual— P/N 52879:C6 6/12/2018
Pressing 3 while viewing Read Status Screen #1 will display the following screen:
RELAY
1=RELAY 1
2=RELAY 2
3=RELAY 3
Pressing 1 while viewing Read Status Screen #2 will display the following screens:
SYSTEM SETTINGS
TROUBLE REMIND
CANADIAN OPTION
CHRGR DISABLE
Pressing 2 while Read Status Screen #2 will display the following screen:
TIMERS
PAS DELAY
PRE SIGNAL
WATERFLOW DELA
DAYLIGHT SAVINGS
ENABLED NO
START MONTH MAR
START WEEK WK 3
Pressing 1 while viewing Read Status Screen #3 will display the following screens:
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS
1=HISTORY
2=WALKTEST LOG
3=EXIT PRINTING
ALARM
TROUBLE
SUPERV
NO
OFF
XXX XXXXX XXXX XXXX
NO
120
AC LOSS DELAY
120
0
DAYLIGHT SAVINGS
END MONTH
END WEEK
HISTORY
PRINT
Operating Instructions
SYSTEM SETTINGS
USER BANNER:
TIMERS
2
NOV
WK 3
103