Honeywell NOTIFIER SFP-5UD Series Manual page 107

Transmittal Priorities
The table below shows UL listed receivers which are compatible with the SFP-5UD and SFP-10UD.
0 SIA-DCS-8
1 SIA-DCS-20
2 Ademco Contact ID
1. With 685-8 Line Card with Rev. 4.4d software
2. With 124060V206B and 124063 Line Card Rev. B
3. With version V2.4 Receiver and 126047 Line Card Rev. G
4. With 124077V2.00 Receiver and 126047 Line Card Rev. M
5. With V.7301 Receiver S/W
6. With 01.01.03 Receiver S/W and Line Card 01.01.03
7. With software V1.86
8. With software V1.72
9. With DSP4016 and V1.6 Line Card
10. With software V3.9
IMPORTANT! It is the installer's responsibility to ensure that the Digital Alarm Communicator/Transmitter is compatible with the
Central Station Receiver, utilized by the monitoring service, prior to installation. The Compatibility Table provides a list of compatible
receivers and associated software versions for the receivers. Changes in the hardware and/or software by the receiver manufacturers may
affect the receiver compatibility with the FACP DACT. After completing the installation, communication between the DACT and Cen-
tral Station Receiver must be tested and verified.
SFP-5UD & SFP-10UD Series Manual— P/N 52879:C6 6/12/2018
Format


 
Table 5.1 Compatible UL Listed Receivers
   
   
   
Central Station Communications


  



107