Ground Control Operation - nifty Heightrider HYBRID Series Operating/Safety Instructions Manual

Height Rider/SP Series
Operating & Safety Instructions
4.2

GROUND CONTROL OPERATION

4.2.1 GROUND CONTROL FUNCTIONS
1 Emergency Stop
2 Green Power Button
3 Red Lamp
4 Green Lamp
5 Engine Glow & Start/Stop
6 Base/Platform Selector
7 Charging Status
8 Auxiliary Powered Descent
(OPTIONAL)
24
Push to Stop Operation
Push and hold for Power
Indicates Safe Working Load limit or Maximum Tilt Angle
exceeded. Safely remove any unnecessary items from the
platform or lower booms to stowed position and drive on to level
ground to restore machine functions.
Indicates machine is switched on. Lamp will extinguish during a
safety critical condition when red lamp (3) is flashing.
Anti-clockwise for Glow, Clockwise to Start/Stop engine
Clockwise for Platform, Centre for Base, 0 for all power off
Green (fast flash) - Batteries are charging
Green (slow flash) - Batteries are charging and between 80% &
100% capacity.
Green (static) - Batteries are fully charged
Red - Fault (refer to section 4.6)
Push and hold to enable boom functions in the event of normal
operation loss. (i.e. Fuel tank empty)
Twist to Enable Operation
Release to Cease operation
English/USA – 04/14
Original instructions