Table of Contents
Advertisement
4.2
GROUND CONTROL OPERATION
4.2.1
GROUND CONTROL FUNCTIONS
1 Emergency Stop
2 Green Power Button
3 Red Lamp
4 Green Lamp
5 Base/Platform Selector
6 Charging Status
English/USA – 05/15
Original instructions
Operating & Safety Instructions
Push to Stop Operation
Push and hold for Power
Indicates Safe Working Load limit or Maximum Tilt Angle
exceeded. Safely remove any unnecessary items from the
platform or lower booms to stowed position and drive on to level
ground to restore machine functions.
Indicates machine is switched on. Lamp will extinguish during a
safety critical condition when red lamp (3) is flashing.
Clockwise for Platform, Centre for Base, 0 for all power off
Green (fast flash) - Batteries are charging
Green (slow flash) - Batteries are charging and between 80% &
100% capacity.
Green (static) - Batteries are fully charged
Red - Fault (refer to section 4.6)
Height Rider/SP Series
Twist to Enable Operation
Release to Cease operation
23
Advertisement
Table of Contents
