Height Rider/SP Series Operating & Safety Instructions Table of Contents Introduction and General Information FOREWORD ..................... 2 SCOPE......................3 INTRODUCING THE HEIGHT RIDER SELF-PROPELLED (SP) SERIES ....3 GENERAL SPECIFICATION................4 IDENTIFICATION (UK PLATE)................5 EC DECLARATION OF CONFORMITY (Typical) ..........7 Safety MANDATORY PRECAUTIONS ................
Height Rider/SP Series Operating & Safety Instructions Introduction and General Information FOREWORD The purpose of these manuals is to provide the customer with appropriate safety operating and maintenance instructions essential for proper machine operation. All information in these manuals should be READ and fully UNDERSTOOD before any attempt is made to operate the machine.
Height Rider/SP Series Operating & Safety Instructions GENERAL SPECIFICATION FEATURE HR17 (SP50) HYBRID 4x4 MAXIMUM HEIGHT - WORKING 17.00 m 55 ft 10 in MAXIMUM HEIGHT - PLATFORM 15.00 m 49 ft 3in MAXIMUM OUTREACH 9.10 m 29 ft 10in MAXIMUM HEIGHT –...
Height Rider/SP Series Operating & Safety Instructions IDENTIFICATION (UK PLATE) IFTYLIFT LTD. FI GLE DRIVE, STO EBRIDGE MILTO KEY ES MK13 0ER E GLA D TEL 01908 223456 : FAX 01908 312733 e-mail : info@niftylift.com SERIAL o TYPE YEAR OF MA UFACTURE WEIGHT RATED LOAD PERSO S...
Page 8
Height Rider/SP Series Operating & Safety Instructions 1.5a IDENTIFICATION (USA PLATE) IFTYLIFT LTD. FI GLE DRIVE, STO EBRIDGE MILTO KEY ES MK13 0ER GREAT BRITAI TEL (01144)1908 223456 : FAX (01144) 1908 312733 e-mail : info@niftylift.com THIS WORK PLATFORM COMPLIES WITH A SI STA DARD A 92- MODEL SERIAL O YEAR OF MA UFACTURE...
Height Rider/SP Series Operating & Safety Instructions EC DECLARATION OF CONFORMITY (Typical) EC DECLARATION OF CONFORMITY MANUFACTURER AND NIFTYLIFT LTD PERSON RESPONSIBLE MALCOLM NORTH FOR DOCUMENTATION: ADDRESS: FINGLE DRIVE, MACHINE TYPE: MOBILE ELEVATING WORK PLATFORM MODEL TYPE: SERIAL NUMBER: NOTIFIED BODY: TUV NORD CERT GmbH NOTIFIED BODY NUMBER: 0044 ADDRESS:...
Height Rider/SP Series Operating & Safety Instructions Safety MANDATORY PRECAUTIONS When operating your Niftylift, your safety is of utmost concern. In order to fully appreciate all aspects of the machines operation it should be ensured that each operator has READ and fully UNDERSTOOD the relevant manual covering machine use, maintenance and servicing.
Page 11
Height Rider/SP Series Operating & Safety Instructions 2.1.8 This machine contains several hazardous substances such as but not limited to: Battery acid, Hydraulic Fluid, Engine Coolant, Antifreeze, LPG, Diesel Fuel, Petrol, Engine Oil, Grease, Gasoline. 2.1.9 Covers and canopies should remain closed when the machine is in operation. Only trained personnel should carry out maintenance on the machine, ensuring at all times they protect themselves from electrical, heat and mechanical hazards.
Page 12
Height Rider/SP Series Operating & Safety Instructions 2.1.23 Under all travel conditions the operator shall limit travel speed according to conditions of ground surface, congestion, visibility, slope, location of personnel and other factors causing hazards of collision or injury to personnel. 2.1.24 The aerial platform shall not be driven on grades, side slopes or ramps exceeding those for which the aerial platform is rated by the manufacturer.
Height Rider/SP Series Operating & Safety Instructions 2.1.38 NEVER START THE NIFTYLIFT IF YOU SMELL PETROL (GASOLINE), LIQUID PROPANE OR DIESEL FUEL. THESE FUELS ARE HIGHLY FLAMMABLE 2.1.39 The operator shall implement means provided to protect against use by unauthorised persons. 2.1.40 Never remove anything that may affect the stability of the machine such as, but not limited to, batteries, covers, engines, tyres or ballast.
Height Rider/SP Series Operating & Safety Instructions TEST REPORT All Niftylift machine models are subjected to a comprehensive ‘type test’ which duplicates all combinations of safe working load (SWL), overload, windage, inertia and pull force to assess the various safe stability criteria. Self propelled machines are also subjected to kerb and braking tests at the SWL to satisfy additional ‘worse case’...
Height Rider/SP Series Operating & Safety Instructions Preparation and Inspection UNPACKING Since the manufacturer has no direct control over the shipping or carriage of any Niftylift it is the responsibility of the dealer and/or owner and/or lessee to ensure the Niftylift has not been damaged in transit and a Pre-operational Report has been carried out by a qualified engineer before the aerial platform is put into service.
Height Rider/SP Series Operating & Safety Instructions PRE-OPERATIONAL SAFETY CHECK SCHEDULES Before use each day and at the beginning of each shift the aerial platform shall be given a visual inspection and functional test including, but not limited to, the following: It is recommended that these be performed at regular intervals as indicated on each checklist.
Page 17
Height Rider/SP Series Operating & Safety Instructions 3.3.3 MONTHLY SAFETY CHECKS Check the engine oil level (if applicable). Check wheel nuts are secured (torque 110ft lbs / 150Nm). Check that the slew worm is secured and correctly in mesh. Clean and re-grease. Check the track rod linkage.
Page 18
Height Rider/SP Series Operating & Safety Instructions USA (SOUTH STATES), SOUTH AMERICA, AUSTRALIA (VICTORIA, NEW SOUTH WALES) 7.5 years USA (WEST STATES), SOUTH AFRICA, INDIA, PAKISTAN, IRAN, AUSTRALIA (WESTERN, 7 years SOUTH, QUEENSLAND) NORTH AFRICA, SAUDI, DUBIA, AUSTRALIA (NORTHERN TERRITORY) 6 years Note: The date of manufacture of the toughcage floor is located on its underside.
Height Rider/SP Series Operating & Safety Instructions PLACARD, DECALS & INSTALLATION (UK SPEC) ITEM DESCRIPTION NUMBER Serial Plate P15383 Point Loading P22980 Travel Direction P14784 No Step P14785 Charger Point P19699 P14697 ‘Green machine’ P22804 P17124 Noise Warning 85dB ‘HR17 Hybrid’ P22709 General crush hazard P14782...
Page 20
Height Rider/SP Series Operating & Safety Instructions Emergency controls location P21700 Emergency controls location (small) P23044 General Notice P18870 Battery Drain P19850 ‘Green Machine’ Large P22805 Tie Down Points P14958 ‘Do not place objects on controls’ P21511 English/USA – 03/10 Original instructions...
Page 21
Height Rider/SP Series Operating & Safety Instructions English/USA – 03/10 Original instructions...
Height Rider/SP Series Operating & Safety Instructions Operation CONTROL CIRCUIT COMPONENTS 4.1.1 GROUND CONTROLS MASTER PROGRAMMEABLE LOGIC CONTROLLER (PLC): - Situated under the ground controls canopy, behind the Ground Controls Station is the Master PLC. The main purpose of the Master PLC is to process signals received from all areas of the control circuit on the machine and where appropriate output these to a series of smaller digital modules to operate the relevant machine functions.
Page 24
Height Rider/SP Series Operating & Safety Instructions 4.1.2 PLATFORM PLATFORM PROGRAMMEABLE LOGIC CONTROLLER (PLC): - Situated in the platform is the Platform Control Station. Behind the platform control panel is the Platform PLC. The purpose of the Platform PLC is to interpret signals received from the Platform Control Station and convert them to a digital signal, which is then output to the Master PLC for processing.
Page 25
Height Rider/SP Series Operating & Safety Instructions Note; During normal machine usage with the engine running, the batteries are on continuous recharge The exception to this is when the control system decides that additional electric power is required in order to maintain drive/function speed. If the operator is using electric power only and a low battery warning has activated, it is advisable to start the engine, enabling continued use of the machine, whilst at the same time recharging the batteries.
Height Rider/SP Series Operating & Safety Instructions GROUND CONTROL OPERATION 4.2.1 GROUND CONTROL FUNCTIONS To operate any control panel function; Push and hold Green Power button, Press and Hold required function to activate, then release to deactivate. (Ground Control Panel) P21137/03 1 Emergency Stop Push to Stop Operation...
Page 27
Height Rider/SP Series Operating & Safety Instructions Base Levers P19748/01 1 Operates Platform Levelling Up for Backward ** Down for Forward ** 2 Operates the Flyboom Up for Up Down for Down 3 Operates Telescoping Up for Out Down for In 4 Operates the Link Booms Up for Up Down for Down...
Page 28
Height Rider/SP Series Operating & Safety Instructions To return control to the platform, turn base control key-switch to the Platform position (fully clockwise). When not in use return machine to stowed position, turn the base control key-switch anti- clockwise to the OFF position, remove key and chock wheels. EMERGENCY PROCEDURES Push in red emergency stop to shut down all functions.
Height Rider/SP Series Operating & Safety Instructions PLATFORM CONTROL OPERATION 4.3.1 PLATFORM CONTROL FUNCTIONS P22039/01 P21139/01 P21140/01 (Platform Control Station) Engine Glow/Start/Stop Anti-clockwise hold for Glow Clockwise to Start/Stop engine Variable Speed Control Anti-clockwise to decrease Clockwise to increase speed Terrain Selector Anti-clockwise for High Gear Clockwise for Low Gear...
Page 30
Height Rider/SP Series Operating & Safety Instructions 4.3.2 MULTI-FUNCTION DIGITAL GAUGE Situated on the Cage Control Panel, this gauge provides a warning indication for a range of functions. The warning icons on the right hand side indicate a safety critical situation where immediate action is required;...
Page 31
Height Rider/SP Series Operating & Safety Instructions 4.3.3 WARNING ICONS Advisory High Speed Drive Available : Machine can be driven at its maximum speed if ground and evironmental conditions are suitable and it is safe to proceed. High Water Temperature : Check engine coolant level. Caution, the cooling system is pressurised, so allow engine to cool sufficiently before removing filler cap.
Page 32
Height Rider/SP Series Operating & Safety Instructions 4.3.4 OPERATION NEVER START THE NIFTYLIFT IF YOU SMELL PETROL (GASOLINE), LIQUID PROPANE OR DIESEL. THESE FUELS ARE FLAMMABLE. BEFORE OPERATING THE NIFTYLIFT ENSURE THAT EACH OPERATOR HAS READ AND FULLY UNDERSTOOD THE OPERATING MANUAL. FAILURE TO DO SO MAY RESULT IN DEATH OR SERIOUS INJURY.
Page 33
Height Rider/SP Series Operating & Safety Instructions 4.3.5 SiOPS - LOAD SENSING CONSOLE (If fitted) WHEN OPERATING THIS MACHINE THE USER MUST BE AWARE OF ANY OVERHEAD OBSTRUCTIONS. This machine incorporates a load sensing cage console that senses if the operator has been pushed or has fallen against the console.
Height Rider/SP Series Operating & Safety Instructions DRIVING CONTROLS DO NOT OPERATE THE NIFTYLIFT WHILST ELEVATED UNLESS ON A FIRM, LEVEL SURFACE FREE FROM ANY POSSIBLE OBSTRUCTIONS OR HAZARDS BOTH AT GROUND LEVEL AND OVERHEAD. Check proposed route for possible hazards, obstructions and personnel. Depress footswitch located on platform floor.
Height Rider/SP Series Operating & Safety Instructions CAGE WEIGH SYSTEM 4.5.1 LOAD CELL VERSION The Niftylift HR17 is fitted with an electronic load cell. This load cell is a moment-independent, redundant design. This means that independent of the load position inside the machine cage, the actual load is measured and if pre-configured limit values are exceeded, warnings will be activated.
Height Rider/SP Series Operating & Safety Instructions BATTERIES AND CHARGING BATTERIES MUST BE RECHARGED IN A WELL-VENTILATED AREA FREE OF FLAME, SPARKS OR OTHER HAZARDS THAT MAY CAUSE EXPLOSION. HIGHLY EXPLOSIVE HYDROGEN GAS IS PRODUCED DURING THE CHARGING PROCESS. Recharge batteries at the end of every working day or shift. (Note: To recharge batteries fully from flat takes approx.
Page 37
Height Rider/SP Series Operating & Safety Instructions Notes: If the charger is reconnected to the power supply shortly after it has gone through its full charging cycle, the charger will show an Amber light, immediately followed by the Green 80% lamp.
Page 38
Height Rider/SP Series Operating & Safety Instructions The charger requires a minimum battery voltage of 4.5 volts per battery (overall for two batteries 9 volts, for 4 batteries 19 volts for 8 batteries 38 volts). If the voltage is below these values then the charger will not function (Charger will not detect batteries to begin charge.) If the batteries have fallen to such a poor state they will have to be removed from the machine and charged individually with an independent charger until the optimum voltage has been reached.
Height Rider/SP Series Operating & Safety Instructions TRANSPORTING, TOWING, CRANEAGE, STORAGE AND SETTING TO WORK 4.7.1 TRANSPORTING If a work platform is to be moved over a longer distance, whether the machine is trailer mounted, vehicle mounted, self propelled or tracked, the following procedure should be read before restraints are attached to the machine.
Page 40
Height Rider/SP Series Operating & Safety Instructions 4.7.2 TOWING If the Niftylift needs to be towed in case of an emergency, it will be necessary to chock the wheels before starting any of the following actions. GEARBOX DISENGAGEMENT In order to safely tow the HR17, the drive mechanism will need to be bypassed. The drive gearboxes located on the front and rear wheel hubs must be disengaged as follows;...
Page 41
Height Rider/SP Series Operating & Safety Instructions 4.7.4 STORAGE If being stored for any length of time without use, then the machine should be thoroughly inspected for the following:- Grease all bearings /slides, worm drives, etc. If machine is to be left on an incline, chock wheels to prevent creep. If machine is to be left outside or in a hostile environment, cover with suitable weatherproof media to prevent deterioration.
Height Rider/SP Series Operating & Safety Instructions Emergency Controls GENERAL CHECKING THE OPERATION OF THE EMERGENCY CONTROLS EVERY DAY AND/OR BEFORE EACH SHIFT IS AN ESSENTIAL PART OF THE OPERATOR'S DUTIES The operator and all ground personnel must be thoroughly familiar with the location and operation of the emergency controls.
Height Rider/SP Series Operating & Safety Instructions Responsibilities CHANGES IN OWNERSHIP When a change of ownership of a Niftylift occurs, it shall be the responsibility of the seller to notify Niftylift directly of the unit, model and serial number and the name and address of the new owner within 60 days.
Height Rider/SP Series Operating & Safety Instructions INSPECTION/SERVICE/PRE-HIRE CHECK LIST MACHINE SERIAL NO TOWING PASS FAIL Machine secured on trailer Straps correctly positioned and tightened Wheels chocked if necessary AXLES, WHEELS AND BRAKES Wheels are secure, tyre condition acceptable Wheel bearings O.K. Brake linkages and cables secure Brake shoe wear not excessive Machine climbs slope...
Page 45
Height Rider/SP Series Operating & Safety Instructions TILT ALARM PASS FAIL Booms raised on slope - drive disabled, siren tone constant Boom operation unaffected Booms lowered - drive restored INTERNAL (POWER PACK) Power pack and all components secure All cables and terminals secure All hose connections secure Hoses not kinked or fouled Charger/control box secure...