Table of Contents
Advertisement
Height Rider/SP Series
Operating & Safety Instructions
4.2
GROUND CONTROL OPERATION
4.2.1
GROUND CONTROL FUNCTIONS
To operate any control panel function;
Push and hold Green Power button,
Press and Hold required function to
activate, then release to deactivate.
(Ground Control Panel)
1 Emergency Stop
2 Operates Platform Levelling
3 Operates the Fly boom
4 Operates Telescoping
5 Operates the Upper Boom
6 Operates the Link Booms
7 Operates Swing
8 Warning triangle
9 Cage overload indicator
10 Cage levelling indicator
11 Refer to Digital Gauge
12 Engine Glow/Start
13 Green Power Button
14 Base Key Switch
24
Push to Stop Operation
Left for Forward**
Up for Up
Up for Out
Up for Up
Up for Up
Up for Anti-clockwise
Indicates all machine functions are disabled except tilt sensor
and boom functions.
Indicates Safe Working Load limit exceeded
Indicates cage level angle limit exceeded
Indicates fault has been detected by Digital Gauge in cage
Press & hold glow symbol
for Glow
Push and hold for Power
Anti-clockwise for Off
Twist to Enable Operation
Right for Backward**
Down for Down
Down for In
Down for Down
Down for Down
Down for Clockwise
Press On/Off symbol to
Start/Stop engine.
Release to Cease operation
Clockwise for Base or Platform
English/USA – 11/13
Original instructions
Advertisement
Table of Contents
