Maintenance; Initial Inspection; Component-Specific Maintenance Tasks - Kettler Quadriga Comp Belt Translation Of Original Operating Instructions

8

Maintenance

8.1

Initial inspection

After 200 km or 4 weeks after purchase
Vibrations produced while riding can cause
screws and springs that were tightened during
manufacture of the pedelec to settle or come
loose.
 Arrange an appointment for the initial
inspection directly when purchasing the
pedelec.
 Have the initial inspection entered and
stamped in the maintenance book.
 Carrying out the initial inspection, see
Section 8.4.
8.2 Maintenance
every six months
You must have your specialist dealer perform
maintenance every six months as a minimum.
This is the only way to ensure that the pedelec
remains safe and fully functional.
Maintenance tasks require technical expertise,
special tools and special lubricants. The pedelec
may become damaged if the stipulated
maintenance intervals and procedures are not
carried out. This is why only specialist dealers
may carry out maintenance.
 Contact your specialist dealer and arrange an
appointment.
 Enter and stamp maintenance tasks in the
maintenance book.
 Perform maintenance.
MY22K01 - 32_1.0_26.08.2021
8.3 Component-specific
maintenance tasks
High-quality components require extra
maintenance. Maintenance tasks require
technical expertise, special tools and special
lubricants. The pedelec may become damaged if
the stipulated maintenance intervals and
procedures are not carried out. This is why only
specialist dealers may carry out maintenance.
Correct maintenance on the fork not only
guarantees a long service life, but also ensures
optimal performance.
Each maintenance interval shows the maximum
cycling hours for the required type of maintenance
that the component manufacturer recommends.
 Optimise performance with shorter
maintenance intervals, depending on use,
terrain and environmental conditions.
 Enter any components with extra
maintenance requirements with their
corresponding maintenance intervals into the
maintenance book when the pedelec is
purchased.
 Inform the buyer of the additional
maintenance schedule.
 Enter and stamp maintenance tasks in the
maintenance book.
Maintenance
196