Excessively Hard Damping On Bumps - Kettler Quadriga Comp Belt Translation Of Original Operating Instructions

9.1.11.4 Excessively hard damping on bumps

When the bike hits a bump, the damper deflects
too slowly and the rear wheel lifts up from the
bump. Traction is reduced (blue line).
Figure 298: Excessively hard damping in the rear frame damper on bumps
Solution
1
2
Figure 299: Position and shape of the compression adjuster (blue) depends on the model
 Turn compression adjuster anti-clockwise.
 The damping and compression hardness is
reduced and the deflection stroke speed is
increased. Sensitivity to small bumps is
increased.
MY22K01 - 32_1.0_26.08.2021
Troubleshooting, fault clearance and repair
Saddle and rider are deflected upwards and
forwards, the rear wheel loses contact with the
ground and control is reduced (green line).
245