Checking The Bell; Checking The Handles; Checking The Usb Cover; Checking The Lighting - Kettler Quadriga Comp Belt Translation Of Original Operating Instructions

7.1.10 Checking the bell

1 Press the bell button downwards.
2 Let button spring back.
 If you do not hear a clear, distinct ring of the
bell, replace bell. Contact specialist dealer.

7.1.11 Checking the handles

 Check the handles are firmly in place.
 Screw loose handles firmly into place.

7.1.12 Checking the USB cover

 If featured, check the position of the cover on
the USB port on a regular basis and adjust if
necessary.

7.1.13 Checking the lighting

1 Switch light on.
2 Check that the front and rear lights come on.
 If the front and rear lights do not come on, take
pedelec out of service. Contact specialist
dealer.

7.1.14 Checking the brake

1 Pull both brake levers when stationary.
2 Push the pedals.
 If no resistance is generated in the usual brake
lever position, take pedelec out of service.
Contact specialist dealer.
 If the brake is losing fluid, take pedelec out of
service. Contact specialist dealer.
MY22K01 - 32_1.0_26.08.2021
Cleaning and servicing
172