Checking The Back-Pedal Brake - Kettler Quadriga Comp Belt Translation Of Original Operating Instructions

7.5.2.5 Checking the back-pedal brake

Only applies to pedelecs with this equipment

There are sharp corners and edges on the back-
pedal brake. Wear gloves.
1 Hold and check counter support to ensure it is
firmly attached to rear frame down tube.
 Tighten screw into the counter support if it is
loose.
2 Carry out brake test. Listen for noises while
doing so.
 If braking with the backpedal makes noises,
contact specialist dealer.
MY22K01 - 32_1.0_26.08.2021
Cleaning and servicing
189