Battery Errors - Kettler Quadriga Comp Belt Translation Of Original Operating Instructions

9.1.4

Battery errors

Symptom Cause
The battery discharges The battery may be at the end of its
quickly. useful life.
Is the charger mains plug firmly
connected to the socket?
Is the charger plug firmly connected to
battery?
The battery cannot be
recharged.
Is the adapter firmly connected to the
charger plug or the battery's charging
port?
Is the connection terminal for the
charger, charger adapter or batteries
dirty?
The battery does not start
The battery may be at the end of its
charging when the
useful life.
charger is connected.
Has the temperature in the battery or
The battery and charger
charger exceeded the operating
become hot.
temperature range?
If the charger is used continuously to
The charger is hot.
charge batteries, it may become hot.
The LED on the charger will go out
when the battery is fully charged.
Is the charger plug firmly connected to
battery?
The LED on the charger
does not light up.
Is the battery fully charged?
The battery cannot be
removed.
The battery cannot be
inserted.
Fluid is leaking from the
battery.
Table 65: Error solution for battery
MY22K01 - 32_1.0_26.08.2021
Troubleshooting, fault clearance and repair
Remedy
 Replace old battery with new one.
1 Disconnect the charger mains plug and plug it in again.
2 Start charging.
3 If the battery still won't recharge, contact your specialist
dealer.
1 Disconnect the charger plug and plug it in again.
2 Start charging.
3 If the battery still won't recharge, contact your specialist
dealer.
1 Connect the adapter firmly to the charger plug or the battery
charging port.
2 Start charging.
3 If the battery still won't recharge, contact your specialist
dealer.
1 Wipe with a dry cloth to clean the connection terminals.
2 Start charging.
3 If the battery still won't recharge, contact your specialist
dealer.
 Replace old battery with new one.
1 Interrupt charging process.
2 Leave battery and charger to cool down.
3 Start charging.
 If the battery is too hot to touch, there might be a problem with
the battery.
4 Contact your specialist dealer.
1 Interrupt charging process.
2 Leave charger to cool down.
3 Start charging.
This is not a malfunction.
1 Check connection for any contaminants.
2 Insert charger plug.
3 If the battery still won't recharge, contact your specialist
dealer.
1 Disconnect charger mains plug.
2 Insert mains plug again.
3 Start charging.
4 Contact your specialist dealer if the LED on the charger still
doesn't light up.
 Contact your specialist dealer.
 Contact your specialist dealer.
 Observe all the warnings in Section 2 Safety.
227