7.5.14 Bowden-cable-operated twist grip,
dual-cable
Only applies to pedelecs with this equipment
For a smooth gear shift, set the adjusting
sleeves on the shifter housing.
There is noticeable play of 2 to 5 mm (1/2 gear)
when you turn the twist grip.
1
Figure 202: Twist grip with adjusting sleeves (1) and play
in the gear shift (2)
MY22K01 - 32_1.0_26.08.2021
2
7.5.15 Checking kickstand stability
1 Place the pedelec on a slight elevation of 5 cm.
2 Extend kickstand.
3 Jolt pedelec to check stability.
If the pedelec topples over, tighten screws or
change height of the kickstand.
Cleaning and servicing
195