Rebounding Too Slowly - Kettler Quadriga Comp Belt Translation Of Original Operating Instructions

9.1.9.2 Rebounding too slowly

The fork does not rebound quickly enough after
absorbing a bump. The fork also remains
deflected over subsequent bumps, which reduces
deflection and increases the hardness of impacts.
Available deflection, traction and control decrease
(blue line).
Figure 278: Suspension fork rebounding too slowly
Solution
Figure 279: Turning the rebound screw damper towards
hare symbol
 Turn the rebound screw anti-clockwise towards
the hare symbol.
 The rebound speed is increased (faster
return).
MY22K01 - 32_1.0_26.08.2021
Troubleshooting, fault clearance and repair
The fork remains in a deflected state, causing the
headset and handlebars to move to a lower
position. Body weight is shifted forward after
impact (green line).
235