On-Board Computer; Deactivating The Lock Function; Switching On The On-Board Computer; Switching Off The On-Board Computer - Kettler Quadriga Comp Belt Translation Of Original Operating Instructions

6.18

On-board computer

Notice
 Never use the on-board computer as a handle.
The on-board computer may become
irreparably damaged if you use it to lift the
pedelec.
3
Figure 170: Overview of the on-board computer structure
and operating elements
Symbol Use
1 Riding light button
2 Display
3 On-Off button (control panel)
4 USB port protective flap
Table 59: Operating elements overview

6.18.1 Deactivating the lock function

Only applies to pedelecs with this equipment
 Insert the on-board computer.
 The lock function is deactivated. Assistance
from the drive is available again.
 The drive unit emits two unlock audible signals.
MY22K01 - 32_1.0_26.08.2021
2
1
4

6.18.2 Switching on the on-board computer

Figure 171: Position of On-Off button (control panel)
 Press the On-Off button (control panel) briefly.
 The electric drive system is switched on.
6.18.3 Switching off the on-board
computer
If the on-board computer is not inserted into its
mount, it will switch off automatically after one
minute to save energy if no button is pressed.
 Press the On-Off button (control panel) briefly.
 The electric drive system is switched off.
Operation
1
151