Camera Naming Convention - Photon Focus MV1-D3360 Series User Manual

Introduction
This manual describes standard Photonfocus D3360 series cameras that have a Gigabit Ethernet
(GigE) interface. The cameras contain a CMV8000 sensor from CMOSIS. The Photonfocus D3360
GigE series has the following camera model families:
DR1 cameras DR1 cameras use a proprietary coding algorithm to double the maximal frame
rate compared to a standard GigE camera over one GigE cable.
D-cameras Standard area scan cameras.
There are camera models in every camera family with the following sensor types:
Monochrome Standard monochrome sensor
Color Color sensor

2.1 Camera Naming convention

The naming convention of the D3360 camera series is summarized in Fig. 2.1.
Figure 2.1: Camera naming convention
Prefix1 DR1 cameras have DR1 as Prefix1, whereas the other cameras have MV1 as Prefix1.
Prefix2 Camera family specifier. The following specifiers are used in this manual: "D":
standard area scan cameras (digital).
Sensor width All cameras covered in this manual use sensors with a width of 3360 pixels.
Sensor height This indication is optional to avoid ambiguity. The DR1 and D-cameras use the 8
MPix CMV8000 sensor and don't have a height indication.
Sensor type Available sensor types are: "C": color cameras. Cameras without sensor type
specifier have a standard monochrome sensor.
Camera speed The camera speed is usually the product of the camera interface clock in MHz
and the number of parallel interface channels (taps).
Interface type All cameras covered by this manual have a GigE interface denoted by "G2".
Interface resolution Maximal resolution (bit width) of the camera interface.
MAN071 12/2018 V1.1
2
7 of 125