Table of Contents
Advertisement
2.
Click on the Select / Connect button in the PF_GEVPlayer . A window with all detected
devices appears (see Fig. 3.10). If your camera is not listed then select the box Show
unreachable GigE Vision Devices.
Figure 3.10: GEV Device Selection Procedure displaying the selected camera
3.
Select camera model to configure and click on Set IP Address....
Figure 3.11: GEV Device Selection Procedure displaying GigE Vision Device Information
.
MAN071 12/2018 V1.1
3.6 Getting started
19 of 125
Advertisement
Table of Contents
