Introduction; Camera Naming Convention; Camera List - Photon Focus MV0 3D06 Series User Manual

Introduction

2.1 Introduction
This manual describes standard Photonfocus MV0 CMOSIS series cameras that have a Gigbit
Ethernet (GigE) interface. The cameras contain CMV2000 and CMV4000 from CMOSIS.

2.2 Camera Naming Convention

The naming convention of the MV0 CMOSIS camera series is summarized in Fig. 2.1.
M V 0 - D 2 0 4 8 x 1 0 8 8 - C 0 1 - 3 D 0 6 - 7 6 8 - G 2
2 r e f i x 1
Figure 2.1: Camera naming convention
Prefix1 Camera platform and usage prefix. The following prefix are available for this camera
series: MV0 with form factor 30x30.
Prefix2 Camera family specifier. The following specifiers are used in this manual: "D": digital
standard area scan cameras.
Sensor width Width of image sensor of the camera.
Sensor Manufacturer Sensor manufacturer. "C": CMOSIS
Sensor Family Sensor family of the prior indicated manufacturer. "01": CMV2000/4000 series
3D coordinate data format Available 3D coordinate data formats are: "3D06": integer part 12
digits, fractional part 4 digits (see also Section 13.5.7).
Camera speed The camera speed is usually the product of the camera interface clock in MHz
and the number of parallel interface channels (taps).
Interface type Interface type specification: "CL": CameraLink
(GigEVision), "U3": USB3 (USB3 Vision).

2.3 Camera list

A list of all cameras covered in this manual is shown in Table 2.1.
MAN083 08/2020 V1.2
P r e f i x 2
S e n s o r w i d t h & h e i g h t
S e n s o r
M a n u f a c t u r e r
S e n s o r 3 D d a t a
F a m i l y f o r m a t
®
, "G2": Gigabit Ethernet
I n t e r f a c e t y p e
C a m e r a
s p e e d
13 of 129
2