Width Setting In Dr1 Cameras - Photon Focus MV1-D3360 Series User Manual

7 Software
7.10.2 Color Fine Gain (Color cameras only)
To set the color fine gain:
1. Set the GainSelector (in AnalogControl) to the desired position (see also below).
2. Set the Gain value to the desired value.
The GainSelector can have the following settings:
DigitalAll Overall gain applied to all color channels
DigitalRed Gain applied to the red channel
DigitalGreen Gain applied to the green channel on the same row as the blue channel
DigitalBlue Gain applied to the blue channel
DigitalGreen2 Gain applied to the green channel on the same row as the red channel
To obtain color gain values using the PF_GEVPlayer, follow could use the following procedure:
1. Open the camera in the PF_GEVPlayer, apply the desired settings and start the grabbing of
the camera.
2. Set all color gains of the camera (DigitalRed, DigitalGreen, DigitalBlue, DigitalGreen2) to
1.
3. Point the camera to a neutral reference (object that reflects all colors equally), e.g. a
special grey reference card.
4. Do a white balancing in the PF_GEVPlayer as described in Section 7.2.4.
5. Copy the values to the camera DigitalGain settings, i.e. copy the value of the Red channel
in the Image Filtering window of the PF_GEVPlayer to the DigitalRed value value of the
camera (see above), copy the Green value to both DigitalGreen and DigitalGreen2 and
copy the Blue value to DigitalBlue. These values could also be stored in the camera's
non-volatile storage (see Section 7.7).
6. Disable RGB Filtering in the Image Filtering dialog of the PF_GEVPlayer as the color
channel correction is now made in the camera.

7.11 Width setting in DR1 cameras

To set the width in DR1 cameras, please follow this procedure:
1. Set property Window_W to target width.
2. Read value of property WidthInterface.
3. Set property Width to the value of property WidthInterface.
When double rate is enabled (property DoubleRate_Enable=True), WidthInterface shows the
width of the modulated image. When double rate is disabled (property
DoubleRate_Enable=False), WidthInterface has the same value as Window_W.
108 of 125
MAN071 12/2018 V1.1