Table of Contents
Advertisement
To have a quick overview of the available categories, all categories should be collapsed. The
categories of interest can then be expanded again. If the name of the property is known, then
the alphabetical view is convenient. If this is the first time that you use a Photonfocus GigE
camera, then the visibility should be left to Beginner.
The description of the currently selected property is shown at the bottom ot the window.
After selecting a property from a drop-down box it is necessary to press <Enter>
or to click with the mouse on the control window to apply the property value to
the camera.
A red cross at the upper right corner of the GEV Control Window indicates a
parameter error, i.e. a parameter is not correctly set. In this case you should
check all properties. A red exclamation mark (!) at the right side of a parameter
value indicates that this parameters has to be set correctly.
6 o g g l e c a t e g o r y /
a l p h a b e t i c a l v i e w
E x p a n d
c a t e g o r y
C o l l a p s e
c a t e g o r y
P r o p e r t y
d e s c r i p t i o n
Figure 7.2: PF_GEVPlayer Control Window
.
MAN071 12/2018 V1.1
E x p a n d a l l
C o l l a p s e a l l
c a t e g o r i e s
c a t e g o r i e s
P a r a m e t e r
V i s i b i l i t y
e r r o r
s e l e c t i o n
i n d i c a t i o n
7.2 PF_GEVPlayer
97 of 125
Advertisement
Table of Contents
