Installation - Kemppi Flexlite GC Operating Manual

3. INSTALLATION

Ensure that the welding equipment is not connected to the mains and that the welding gun is not connected to the
welding machine until the installation is complete.
Protect the equipment from rain and direct sunshine.
"Assembling gun" on the next page
"Connecting gun" on page 8
"Installing and replacing wire liner" on page 9
"Installing and removing grip handle (optional)" on page 14
Before installation and use
Make sure that you select appropriate welding gun contact tip and wire liner for the filler wire used. Refer also to
"Technical data: Flexlite GC" on page 22 and "Component selection" on page 23.
Ensure compliance with your local and national safety requirements regarding the installation and use of high
voltage units.
Check the contents of the packages and make sure the parts are not damaged.
© Kemppi
6
Flexlite GC
Operating manual - EN
1921860 / 2109