Operation - Kemppi Flexlite GC Operating Manual

4. OPERATION

Before using the equipment, ensure that all the necessary installation actions have been completed according to
your equipment setup and instructions.
Welding is forbidden in places where there is an immediate fire or explosion hazard!
Welding fumes may cause injury. Take care to ensure sufficient ventilation during welding and wear respiratory pro-
tection!
Always check before use that interconnecting cable, shielding gas hose, earth return lead/clamp and mains cable are in
serviceable condition. Ensure that the connectors are correctly fastened. Loose connectors can impair welding per-
formance and damage connectors.
The exact function of the gun and trigger may vary depending on your welding machine settings (e.g. 2T or 4T trigger
logic).
To start welding, press the trigger switch.
For the correct components, refer to "Component selection" on page 23.
© Kemppi
15
Flexlite GC
Operating manual - EN
1921860 / 2109