User Menu-Calibration Settings - Hisense HMD6C30S User Manual

Operational Instructions and Function Adjustment
6) As for the settings of the Backlight menu, see the description below.
7) In the Image Enhancing menu, six enhancing modes are available.
The default value is Off.
8) In the Advanced Settings menu, you can set Brightness, Contrast,
Color Temp., and Gamma.
9) Press to return to the User menu.
Note:
Backlight Settings
The Backlight menu supports custom brightness and nine default
brightness gears. In all image modes, you can input 0-100 under Custom
to adjust the brightness. In DICOM mode, you can select among the 200,
250, 300, 350, 400, 450, 500, 550, and 600 (unit: nit) gears.

User Menu-Calibration Settings


In Single mode, this function is used to calibrate and validate the
DICOM curve.
Procedure:
1) In the User menu, press ▲ or ▼ to select calibration settings and
then press to enter the calibration settings menu.
2) Press ▲ or ▼ to select the target item and then press
corresponding sub-menu.
3) Auto-calibration: In Single mode, this function can be used to
calibrate the DICOM curve and query the previous calibration result.
4) Auto-validation: In Single mode, this function can be used to
validate the DICOM curve and query the previous validation result.
5) Press to return to the User menu.
Note:
1) This function is available only in Single mode.
2) This function is available 30 minutes after the system is powered on.
to enter the
13