Maintenance; Emptying The Dust Tank; Cleaning The Hepa Filter - Tesla PureStar E40 Manual

power outlet. Place the device vertically near the hanger and store it securely.
ACCESSORIES
Choose the right tube for cleaning according to the nature of the area to be cleaned, for example use a
small turbo brush for seats, bed linen, fabric, etc.

MAINTENANCE

Visually inspect the brushes for dirt after each vacuuming. Remove, for example, hair, animal hair, etc.
that have caught on the turbo brush. For easier cleaning, you can remove the turbo brush from the
plastic frame.

EMPTYING THE DUST TANK

We recommend emptying the dust tank and cleaning the filters after each cleaning for hygienic
reasons. To empty the dust tank, press the button on its lid and empty the contents into the waste bin.

CLEANING THE HEPA FILTER

Switch off the vacuum cleaner.
1. Turn the dust tank to the „O" position and remove the dust tank.
2. Pull the HEPA filter out of the metal filter body (in the direction of the arrow) by turning it.
3. For rough cleaning, gently tap dirt from the HEPA filter into the waste bin.
4. Both filters can also be rinsed under running water. Allow the filters to dry thoroughly before using
them again.
5. Insert both filters back in the vacuum cleaner.
HEPA filter
In case of heavy soiling or poor performance of the vacuum cleaner, replace it with a new one.
We recommend replacing it once every 6 months.
WARNING
 Failure to clean or replace the filters can lead to a vacuum cleaner failure!

Do not use any aggressive detergents or cleaning agents or hot water to clean the filters.

To maintain the filtration parameters of the HEPA filter, we recommend dry cleaning.

If you decide to wash the HEPA filter with water, its filtration capacity will be reduced. The
maximum number of filter washes is 3 times, then it is necessary to purchase a new HEPA filter.

Replace the filters if they can no longer be cleaned properly or are damaged.

The filters are not dishwasher safe.

Make sure that the seating surfaces and sealing elements are clean and functional.

Before putting the filters back in the vacuum cleaner, make sure that they are completely dry