Getting Started; Before You Begin; Unpacking - Kontron ETXexpress-WPM User Manual

2. Getting Started

Before You Begin

Before handling your ETXexpress-WPM, read the instructions and safety guidelines on
the following pages to prevent damage to the product and to ensure your own personal
safety.
Always use caution when handling or operating a computer. Only qualified,
experienced, authorized electronics service personnel should access the interior
of a computer. The power supplies produce high voltages and energy hazards,
which can cause bodily harm.
If you have any problems or questions about the unit, please contact Kontron
Post-Sales Technical Support.
High voltages are present inside a computer chassis when the
unit's power cord is plugged into an electrical outlet. Turn off
system power, turn off the power supply, and then disconnect
the power cord from its source before removing the chassis
cover. Turning off the system power switch does not remove
power to components.

Unpacking

When unpacking, follow these steps:
1) After opening the box, save it and the packing material for possible future
shipment.
2) Remove all items from the box. If any items listed on the purchase order are
missing, notify Kontron customer service immediately.
3) Inspect the product for damage. If there is damage, notify Kontron customer
service immediately. Refer to "Guarantee and Warranty Policy" for the return
procedure.
ETXexpress-WPM User's Guide
WARNING
page 13